4 Channel E-Stim Device - TENs, EMS, Russian, 2 & 4 Pole Waveforms
The Quattro 2.5 by Roscoe Medical is one of the highest quality and cost effective 4 channel electrotherapy devices on the market. Simply switch between 2 & 4 pole, Russian, EMS, and TENS waveforms to provide a wide variety of e-stim treatment options. Portable and light weight design allow for both home care and in clinic treatment. With the advanced operation system users will enjoy a complete range of therapy with only a click of a button. Interferential and pre-modulated modes offer frequency modulation as well as static.
The Quattro 2.5 E-stim Unit is one the best values for a 4 channel e-stim machine that we offer at ProHealthcareProducts.com. Users agree the Quattro 2.5 is both easy to use and very dependable. 4 channels make it easy to treat multiple areas. Large display, simple controls, and automatic features make this electrotherapy machine one of our highest rated in the store.
Featuring microprocessor-controlled professional four-channel electrotherapy technology, the Quattro 2.5 unit from Roscoe Medical provides 5 different waveforms designed for treating chronic pain, soft tissue injuries, post traumatic acute pain, and much more.
The Quattro 2.5 includes each of the following e-stim waveforms:
IF 4-Pole
- Waveform Type: Bi-phasic square
- Mode Selection: CC (Constant Current) or CV (Constant Voltage)
- Vector: Auto: 0%-100%, Manual: 0°-90°
- Carrier Frequency (C.F.): 4.0kHz
- Sweep Low Beat Frequency (Beat L): 1 - (Beat H) Hz
- Sweep High Beat Frequency (Beat H): (Beat L) - 150 Hz
- Output Intensity: 0-50mA (CC, at 1k ohm load); 0-50V (CV, at 1k ohm load)
- Treatment Time: 1-60 minutes
IF 2-Pole
- Waveform Type: Bi-phasic square
- Mode Selection: CC (Constant Current) or CV (Constant Voltage)
- Carrier Frequency (C.F.): 4.0kHz
- Sweep Low Beat Frequency (Beat L): 1-(Beat H.) Hz
- Sweep High Beat Frequency (Beat H): (Beat L.) - 150 Hz
- Output Intensity: 0-50mA (CC, at 1k ohm load); 0-50V (CV, at 1k ohm load)
- Treatment Time: 1-60 minutes
Russian
- Waveform Type: Bi-phasic square
- Mode Selection: CC (Constant Current) or CV (Constant Voltage)
- Carrier Frequency (C.F.): 2.5kHz
- Burst Frequency (Freq.): 20-100 Hz
- Output Intensity: 0-50mA (CC, at 1k ohm load); 0-50V (CV, at 1k ohm load)
- Duty Cycle: 10%, 20%, 30%, 40%, and 50%
- Cycle Time: Continuous, 5/5, 4/12, 10/10, 10/20, 10/30, 10/50
- Treatment Time: 1-60 minutes
- Ramp Time (Ramp): 1s, 2s, and 5s
EMS
- Waveform Type: Bi-phasic square
- Mode Selection: CC (Constant Current) or CV (Constant Voltage)
- Frequency: 1-250 Hz
- Frequency Modulation (F.M.): 0-249 Hz
- Step Duration (P. Dur): 30-400µs
- Amplitude Modulation (A.M.): 0%-100%
- Output Intensity: 0-100mA (CC, at 1k ohm load); 0-100V (CV, at 1k ohm load)
- Treatment Time: 1-60 minutes
- Ramp Time: 1s, 2s, and 5s
- Cycle Time: Continuous, 4/4, 4/8, 7/7, 5/5, 4/12, 10/10, 10/20, 10/30, 10/50
TENS
- Waveform Type: Mono-phasic square
- Mode Selection: CC (Constant Current) or CV (Constant Voltage)
- Frequency: 1-250 Hz
- Frequency modulation (F.M.): 0-249 Hz
- Burst Rate (Burst): 0-10Hz (7 pulse)
- Phase Duration (P. Dur): 30-400µs
- Amplitude Modulation (A.M.): 0%-100%
- Output Intensity: 0-100mA (CC, at 1k ohm load); 0-100V (CV, at 1k ohm load)
- Cycle Time (Cycle): Continuous, 4/4, 4/8, 7/7, 5/5, 4/12, 10/10, 10/20, 10/30, 10/50
- Treatment Time: 1-60 minutes
Features of the Quattro 2.5 Four Channel Electrotherapy Device
- 2 separate timers to treat two areas or 2 patients at the same time
- Preset protocols as well as customized user defined protocols
- 4 Channels of electrical stimulation output
- Large easy to read LCD display with exact dial performance and two programmable timers
- 10 presets per waveform
- Designed to be used on a table top
- Stim indicator light
The Quattro 2.5 Electrotherapy Device Includes
- 8 Sets of electrodes
- 8 sets of rubber electrodes with sponges
- 8 Straps
- 4 sets of lead wires
- User manual with preset protocol guide
- 2 Year Manufacturer Warranty
Product Specifications
- Product Dimensions: 10 ½” (W) x 15” (L) x 8” (H)
- Product Weight: 6.7 lbs
- Mode Selection: CC (Constant Current) or CV (Constant Voltage)
- Adapter Supply Voltage: 100-240 VAC, 50-60 Hz, 0.6A
- Adapter Output: 15V - 1.2A Max.
- Maximum Treatment Time: 60 Minutes
Replacement Parts
Click HERE to purchase the Replacement Cord & Adapter
How to set up the Quattro 2.5 Electrotherapy Device
If you have questions about the Quattro 2.5 Electrotherapy Device or any of the other physical therapy modalities ProHealthcareProducts.com sells, please contact our customer service department.
**Note: Ultrasounds may only be returned if the product has NOT been used. Used Ultrasound devices may not be returned due to sanitary health reasons set by the FDA. If you are attempting to return the device due to defect or malfunction with performance, this would go through the warranty and we ask you to please contact us for a warranty claim
***The Current Solutions ComboCare Electrotherapy Ultrasound unit is a Class II Medical Device.***
